Axeon Video Processor

Specializes in the field of #Axeon, # Axeon Video Processor

Key Benefits:

Waterproof, one-touch connector

Fast setup, smooth operation
Screening procedures are vastly simplified thanks to the new videoscope connector, which allows scopes to be connected in one smooth operation. In addition, the waterproof design facilitates cleaning and eliminates the need for a water-resistant cap. This design reduces the risk of scope damage from inadvertent immersion in water or contact with fluids to avoid repair costs.

Remarkable distal-end LED scopes

Reduced downtime less running costs
Axeon features LED lighting, which has a significantly longer operating life than before. These are the first scopes for upper and lower examinations that incorporate this type of lighting. In addition, the LED lamp also reduces downtime spent replacing lamps and decreases overall running costs. Axeon is compatible with GIF-LV1 and CF-LV1L/I videoscopes as well as small-diameter scopes that have a wide 145° field of view and minimum 3 mm depth of field

Newly developed, light and compact processor

Less maintenance, space-and energy-efficient design
Since Axeon scopes employ LED lighting, the processor has no lamp or fan, resulting in a lighter, more compact design than conventional videoscope systems and a quieter working environment. The new processor also helps reducing electricity consumption and lamp replacement costs.

Camera-head fiberscope and rigid scope

Convenient versatility enhanced capabilities
A wide variety of OLYMPUS fiberscopes and rigid scopes can be connected to the processor via the optional MAJ-1910 camera-head*. This expands examination capabilities and leverages existing fiberscope and rigid scope assets, further enhancing Axeon's cost effectiveness.
* Requires adapter and separate light source.

CV-V1

Observation	video signal	VBS composite x2, Y/C, and XGA signal; simultaneous outputs possible.
	White balance adjustment	White balance adjustment is possible using the white balance button on the front panel.
	AGC	The image can be electrically amplified when the light is inadequate on the monitor.
	Iris	The iris mode can be selected from "HIGH" or "LOW".
	Freeze	An endoscopic image is frozen using an endoscope.
	Brightness control	7 steps
	Remote control	The VTR and video printer can be controled.
Air Feeding	Pump	Diaphragm type pump
Air Feeding	Pressure switching	2-level available (OFF or feeding)
Power Supply	Voltage	PAL: 220-240 V AC, NTSC: 100-240 V AC
	Frequency	50/60 Hz
	Consumption electric power	120 VA
Size	Dimensions	295 (W) x 111 (H) x 390 (D) mm
Size	Weight	6.2kg

GIF-LV1

Optical System	Field of view	145°
Direction of view	Forward viewing
Depth of field	3-100 mm
Distal End	Outer diameter	9.5 mm
Distal End Enlarged
Bending Section	Angulation range
Insertion Tube	Outer diameter	9.2 mm
Working Length		1030 mm
Total Length		1355 mm
Instrument Channel	Inner diameter	2.8 mm
Minimum visible distance	3 mm from the distal end
Endo-therapy accessory entrance/exit position in field of view

CF-LV1L/I

Optical System	Field of view	145°
Direction of view	Forward viewing
Depth of field	3-100 mm
Distal End	Outer diameter	13.2 mm
Distal End Enlarged
Bending Section	Angulation range
Insertion Tube	Outer diameter	12.8 mm
Working Length		L: 1680 mm, I: 1330 mm
Total Length		L: 1995 mm, I: 1645 mm
Instrument Channel	Inner diameter	3.7 mm
Minimum visible distance	4 mm from the distal end
Endo-therapy accessory entrance/exit position in field of view

MAJ-1910

Size	Camera head	Dimensions	27 (W) x 29 (H) x 41(L) mm
	Camera head	Weight	40 g
	Cable		Ø5.2 mm x 3.76 mm
Cleaing/ Disinfection/ Sterilization	cleaning/disinfection		Immersible in disinfectant solution
Cleaing/ Disinfection/ Sterilization	Sterilization		Compatible with ethylene oxide

* Requires adapter and separate light source.